Product Description:
1. Product Model: MSSNC-6
2. Width: 65mm
3. Height: 14mm
4. Thickness: 1.8mm
5. Standard insert material: carborundum
6. Standard insert colour: black
7. Standard of aluminium: ASTM6063-T5
8. Standard aluminium finish: clear anodised; black anodised is also available by request
9. Standard length: 3m or 6m or cut to length
Applications:
Meishuo step stair nosing are suitable for internal and external applications, including concrete, tile, timber & carpet.
We manufacture a wide range of profiles to be architecturally appealing in various applications that suit varying flooring finishes and there are ranges available for new and existing installation applications.
Finishes:
Aluminium profiles are supplied in mill finish. On request profiles can be supplied with in clear anodized finish or black anodised finish at additional cost. They should be specified with 20 micron clear anodised finish.
Installation:
(1) Block off access to the stairway you will be working on to keep people out of the area. Put up signs and danger tape;
(2) Begin at bottom stair. Carefully lay stair tread upside down on the stair;
(3) Apply a ¼" bead of glue all the way around the perimeter of the bottom side of the tread, keeping approximately ¾" away from the outside edge of tread.
Apply an additional ¼" bead in a wavy pattern on the remainder of the bottom side of the tread inside the perimeter bead, as well as a ¼" bead around each predrilled hole approximately ½" from the hole.
(4) Carefully pick up, turn over and place tread on stair;
(5) Push down on tread to distribute glue or caulk;
(6) Be sure ends of tread are equally spaced on stair and that tread is pushed back as far as it will go against front edge;
(7) Using a shop vacuum, hold end of vacuum hose as close as possible to the predrilled hole(s) in the tread in order to vacuum up dust and drillings from hole and tread;
(8) Carefully drill the first hole toward the center of the tread;
(9) Vacuum out all dust and debris from hole;
(10) Screw in and tighten anchor. Caution: Using a power driver can strip the fastener. If you use a power driver, use the clutch to help prevent stripping;
(11) Drill and anchor another hole on either end of the tread;
(12) Drill all remaining holes and anchor them;
(13) Repeat the process for remaining stair treads
Meishuo:
What Meishuo refers to as Stair Nosings are sometimes also referenced to as Treads, Step Treads, Anti-Slip Nosings, Slip resistant Nosings, Step Nosings and other variations. Essentially they all have the same function which is to promote pedestrian and public safety.
Contact us:
Vicki
1. Product Model: MSSNC-6
2. Width: 65mm
3. Height: 14mm
4. Thickness: 1.8mm
5. Standard insert material: carborundum
6. Standard insert colour: black
7. Standard of aluminium: ASTM6063-T5
8. Standard aluminium finish: clear anodised; black anodised is also available by request
9. Standard length: 3m or 6m or cut to length
Applications:
Meishuo step stair nosing are suitable for internal and external applications, including concrete, tile, timber & carpet.
We manufacture a wide range of profiles to be architecturally appealing in various applications that suit varying flooring finishes and there are ranges available for new and existing installation applications.
Finishes:
Aluminium profiles are supplied in mill finish. On request profiles can be supplied with in clear anodized finish or black anodised finish at additional cost. They should be specified with 20 micron clear anodised finish.
Installation:
(1) Block off access to the stairway you will be working on to keep people out of the area. Put up signs and danger tape;
(2) Begin at bottom stair. Carefully lay stair tread upside down on the stair;
(3) Apply a ¼" bead of glue all the way around the perimeter of the bottom side of the tread, keeping approximately ¾" away from the outside edge of tread.
Apply an additional ¼" bead in a wavy pattern on the remainder of the bottom side of the tread inside the perimeter bead, as well as a ¼" bead around each predrilled hole approximately ½" from the hole.
(4) Carefully pick up, turn over and place tread on stair;
(5) Push down on tread to distribute glue or caulk;
(6) Be sure ends of tread are equally spaced on stair and that tread is pushed back as far as it will go against front edge;
(7) Using a shop vacuum, hold end of vacuum hose as close as possible to the predrilled hole(s) in the tread in order to vacuum up dust and drillings from hole and tread;
(8) Carefully drill the first hole toward the center of the tread;
(9) Vacuum out all dust and debris from hole;
(10) Screw in and tighten anchor. Caution: Using a power driver can strip the fastener. If you use a power driver, use the clutch to help prevent stripping;
(11) Drill and anchor another hole on either end of the tread;
(12) Drill all remaining holes and anchor them;
(13) Repeat the process for remaining stair treads
Meishuo:
What Meishuo refers to as Stair Nosings are sometimes also referenced to as Treads, Step Treads, Anti-Slip Nosings, Slip resistant Nosings, Step Nosings and other variations. Essentially they all have the same function which is to promote pedestrian and public safety.
Contact us:
Vicki